This tutorial is how to flash .pac files (Stock ROM) of Spreadtrum devices like iTel, cherry, some versions of CoolPad, Clone devices etc.
Note:
Battery should be at least 15%
Flash the exact pac file of your device
Do this at your own risk!
Requirement:
Lounch UpgradeDownload Tool
Click on Load button.
Navigate and select the pac file of the device you downloaded.Wait for it to load click on start
Remove your phone battery and insert it back
Hold volume down and connect your device to the computer with a usb
Your device will be detected and flashing process will begin.
This process can take about 10 mins
When you see a green PASSED on progress bar, the process is complete.
Wait for some seconds then disconnect your phone from the computer
Reboot the device.
First boot after this process is longer than usual.
Note:
Battery should be at least 15%
Flash the exact pac file of your device
Do this at your own risk!
Requirement:
Lounch UpgradeDownload Tool
Click on Load button.
Navigate and select the pac file of the device you downloaded.Wait for it to load click on start
Remove your phone battery and insert it back
Hold volume down and connect your device to the computer with a usb
Your device will be detected and flashing process will begin.
This process can take about 10 mins
When you see a green PASSED on progress bar, the process is complete.
Wait for some seconds then disconnect your phone from the computer
Reboot the device.
First boot after this process is longer than usual.
No comments:
Post a Comment
Disclaimer: Opinions expressed in comments are those of the comment writers alone and does not reflect or represent the views of Stack Extra